Documentation Index
Fetch the complete documentation index at: https://docs.deneyapkart.org/llms.txt
Use this file to discover all available pages before exploring further.
USB Micro-B
| Pin No | Pin Name | | Pin Function |
|---|
| 1 | VUSB | | Main power supply line |
| 2 | D- | | Differential data line (negative) |
| 3 | D+ | | Differential data line (positive) |
| 4 | ID | | |
| 5 | GND | | Main ground line |
Li-Po Battery Connector (JST-PH 2.0 mm, 2-pin)
| Pin No | Pin Name | | Pin Function |
|---|
| 1 | VBAT | | Li-Po battery positive (+) terminal |
| 2 | GND | | Li-Po battery negative (–) terminal |
I2C Communication Connector (JST-SH 1.0 mm, 4-pin)
| Pin No | Pin Name | | Pin Function |
|---|
| 1 | GND | | Main ground line |
| 2 | 3V3 | | Regulator output (3.3 V) |
| 3 | SDA | | Bidirectional data line |
| 4 | SCL | | Data line clock signal |
Camera Connection Connector (FPC 0.5 mm, 24-pin)
| Pin No | Pin Name | | Pin Function |
|---|
| 1 | GND | | Main ground line |
| 2 | GND | | Main ground line |
| 3 | CAMSD | | Bidirectional data line |
| 4 | GND | | Main ground line |
| 5 | CAMSC | | Data line clock signal |
| 6 | GND | | Main ground line |
| 7 | CAMV | | Frame valid indicator |
| 8 | GND | | Main ground line |
| 9 | CAMH | | Pixel valid indicator |
| 10 | GND | | Main ground line |
| 11 | 3V3 | | Regulator output (3.3 V) |
| 12 | CAMD9 | | Image data line (pixel) |
| 13 | CAMXC | | Camera clock signal input |
| 14 | CAMD8 | | Image data line (pixel) |
| 15 | GND | | Main ground line |
| 16 | CAMD7 | | Image data line (pixel) |
| 17 | CAMPC | | Camera clock signal output |
| 18 | CAMD6 | | Image data line (pixel) |
| 19 | CAMD2 | | Image data line (pixel) |
| 20 | CAMD5 | | Image data line (pixel) |
| 21 | CAMD3 | | Image data line (pixel) |
| 22 | CAMD4 | | Image data line (pixel) |
| 23 | GND | | Main ground line |
| 24 | GND | | Main ground line |
Micro SD Card Connector
| Pin No | Pin Name | Pin Function |
|---|
| 1 | DATA2 | – |
| 2 | DATA3 | Chip select |
| 3 | CMD | Data line output |
| 4 | VDD | Power input |
| 5 | CLK | Data line clock synchronization signal |
| 6 | VSS | Main ground line |
| 7 | DATA0 | Data line input |
| 8 | DATA1 | – |
| 9 | SW | – |
