Skip to main content
  • The most powerful electronic development board of the Deneyap family has been developed using the ESP32-S3-WROOM-1 module.
  • With the new-generation powerful dual-core Xtensa LX7 microprocessor, you can start machine learning and artificial intelligence–based projects using TensorFlow Lite.
  • Thanks to its built-in Wi-Fi and Bluetooth communication capabilities, it enables you to develop Internet of Things and cloud-based projects. A Bluetooth library specific to the device must be used. Click here for Bluetooth examples. You can use Deneyap Kart as a Bluetooth keyboard on Deneyap Kart, Deneyap Kart 1A, Deneyap Kart 1Av2, and Deneyap Kart G boards, as well as on Android, Apple, and Windows devices. Click here for a sample project.
  • By using the Wi-Fi communication feature, you can exchange data between your system and your cloud-based application. In addition, you can use your board as a server to establish your own closed-loop wireless communication network.
  • It features a rich set of peripheral interfaces such as ADC, PWM, UART, SPI, I2C, TWAI, I2S, capacitive sensing, LCD, DVP, RMT, SD/SDIO/MMC, JTAG, timers, pulse counters, and external interrupts. In addition, to provide flexibility, some of these interfaces can be assigned to any desired pin according to your needs.
  • The microprocessor includes an integrated temperature sensor.
  • It has 23 general-purpose pins.
  • A dedicated Li-Po battery connector is provided to help you power your system reliably. Moreover, you can charge your Li-Po battery using this connector and monitor the charge level of the connected battery.
  • On the back side of the board, there is a micro SD card connector and an FPC camera connector to which you can connect the Deneyap Camera.
  • Additionally, 2 buttons and 1 addressable RGB LED are integrated on the board.
  • By using the I2C communication connector, you can quickly build your system consisting of sensors and actuators without the need for wiring or soldering.
  • You can obtain 3.3 V and 5 V outputs from your board for use with peripherals that require continuous external power. Even when powering your system with a Li-Po battery, a 5 V power output is always available.
  • Deneyap Kart 1A v2 features a breadboard-compatible design. The pins are pre-soldered to allow you to start development immediately.
  • Deneyap Kart 1A v2 is compatible with the Arduino IDE. You can start coding by following the provided instructions.
  • With the artificial intelligence (AI) accelerator of the new-generation LX7 processor used in Deneyap Kart 1A v2, signal processing and machine learning performance have been enhanced compared to the first version.
  • Deneyap Kart 1A v2 features Bluetooth version 5 instead of Bluetooth 4.2; thus, it supports long-range (1 km and above) Bluetooth communication, known as Coded PHY.
  • The flash and RAM capacity of Deneyap Kart 1A v2 can be increased up to 1 GB if desired.
  • While the first version of Deneyap Kart 1A included a magnetic field (Hall) sensor, the new version includes an integrated temperature sensor.