Skip to main content
  • Deneyap Rain Sensor generates a logic value based on the amount of water or water vapor.
  • It consists of two circuits connected to each other with a 2-pin female-to-female jumper cable. One of the circuits has a resistive surface and is placed in the area where detection will be performed.
  • It features an ST Microelectronics LM393DT comparator and an ST Microelectronics STM8S003F3 microcontroller.
  • In addition to the I2C communication interface, you can receive data by using the digital or analog input pins of your development board through the module pins.
  • The module has 2 I2C communication connectors (JST SH 4-pin, 1 mm).
  • You can easily and quickly connect modules to each other using a daisy-chain configuration.
  • It can be used compatibly with all Deneyap development boards.
  • It is compatible with breadboards.
  • You can connect it via pins to development boards such as Arduino Uno, Raspberry Pi Pico, etc., that do not have an I2C communication connector.
  • It is suitable for coding with Arduino IDE.
  • It can work together with electronic modules and development boards that have Adafruit Stemma QT and SparkFun Qwiic communication connectors.