Technical Specifications - T3 Foundation - Deneyap Kart

Maximum Continuous Current: 1A
Operating Voltage: 3.3V
Dimensions: 25.4 mm x 25.4 mm
Weight: 11 g (pins soldered)
I2C Address:
0x0C default address
0x0D address when ADR1 is short-circuited
0x11 address when ADR2 is short-circuited
0x12 address when ADR1 and ADR2 are short-circuited
The product includes 1 I2C connection cable, 10 cm in length.

Header (Left)

Module Pin	Description	Development Board Pin
3.3V	3.3V Supply Voltage	3.3V Voltage Output
RES	Microcontroller Reset (Debug)	No Connection
TRIG	Relay Trigger Pin via Transistor	Digital Output
RLY	Relay Trigger Pin	Digital Output

Header (Right)

Module Pin	Description	Development Board Pin
GND	Ground	Ground
SDA	Bidirectional Data Line	SDA
SCL	Data Line Clock Synchronization Signal	SCL
SWIM	Microcontroller SWIM Communication Protocol (Debug)	No Connection

I2C Communication Connectors

Module Pin	Description	Development Board Pin
SCL	Data Line Clock Synchronization Signal	SCL
SDA	Bidirectional Data Line	SDA
3V3	3.3V Supply Voltage	3.3V Voltage Output
GND	Ground	Ground

Terminal

Module Pin	Description
NC	”Normally Closed” position. Power flows.
COM	Common connection point.
NO	”Normally Open” position. Power flow starts when triggered.

General Information Documents