> ## Documentation Index
> Fetch the complete documentation index at: https://docs.deneyapkart.org/llms.txt
> Use this file to discover all available pages before exploring further.

# General Information

* Deneyap Rain Sensor generates a logic value based on the amount of water or water vapor.
* It consists of two circuits connected to each other with a 2-pin female-to-female jumper cable. One of the circuits has a resistive surface and is placed in the area where detection will be performed.
* It features an ST Microelectronics LM393DT comparator and an ST Microelectronics STM8S003F3 microcontroller.
* In addition to the I2C communication interface, you can receive data by using the digital or analog input pins of your development board through the module pins.
* The module has 2 I2C communication connectors (JST SH 4-pin, 1 mm).
* You can easily and quickly connect modules to each other using a daisy-chain configuration.
* It can be used compatibly with all Deneyap development boards.
* It is compatible with breadboards.
* You can connect it via pins to development boards such as Arduino Uno, Raspberry Pi Pico, etc., that do not have an I2C communication connector.
* It is suitable for coding with Arduino IDE.
* It can work together with electronic modules and development boards that have Adafruit Stemma QT and SparkFun Qwiic communication connectors.